实验室建设期间发表的代表性论文 -凯发app

1.   li ma, peixin qiao, weimin long, et al. interface characteristics and mechanical properties of the induction 

      brazed joint of magnesium  alloy az31b with an al-based filler metal. materials and design, 2012, 37; 465

     -469.

2.   jia ma, li bao, guangchun yao, et al. effect of mno₂ addition on properties of nife₂o₄-based cermets.ceramics international, 2011, 37(8): 3381-3387.

3.  qingke zhang, zhefeng zhang. influences of reflow time and strain rate on interfacial fracture behaviors of sn-4ag/cu solder joints. journal of applied physics, 2012, 112(6): 064508.

4.  qingke zhang, zhefeng zhang. thermal fatigue behaviors of sn–4ag/cu solder joints at low strain amplitude.materials science & engineering a, 2013, 580: 374-384.

5.  fangfei sui, weimin long, shengxin liu, et al. effect of calcium on the microstructure and mechanical properties of brazed joint using ag–cu–zn brazing filler metal. materials and design, 2013, 46: 605-608.

6.  xinqi yan, shengxin liu, weimin long, et al. stress corrosion crack of znal15 alloys in hot and humid environment. materials letters, 2013, 93: 183-186.

7.  xinqi yan, shengxin liu, weimin long, et al. the effect of homogenization treatment on microstructure and properties of znal15 solder. materials and design, 2013, 45: 440-445.

8.   li ma, weimin long, peixin qiao, et al. development of a binary zn-based solder alloy for joining wrought magnesium alloy az31b. journal of materials engineering and performance, 2013, 22(1): 118-122.

9.   peng xue, songbai xue, yifu shen, et al. effect of pr on properties and sn whisker growth of sn-9zn-xpr solder. soldering & surface mount technology, 2012, 24(4): 280-286.

10. peng xue, songbai xue, yifu shen, et al. study on properties of sn-9zn-ga solder bearing nd. journal of materials science: materials in electronics, 2011, 23(6): 1272-1278.

11. fangjie cheng, wenshan jin, ying wang, et al. the chemical reactions in solution synthesis of aluminum alloy brazing fluorate flux. advanced materials research, 2011, 291-294: 924-928.

12. 张青科，裴夤崟，龙伟民. 奥氏体不锈钢钎焊界面裂纹形成机制研究. 金属学报, 2013, 49(10): 1177-1184.

13. guanxing zhang, xingxing wang, weimin long, et al. effect of oxygen content on microstructure and brazing properties for silver based powdered solder. oxidation of metals  (已录用).

14.  王星星，张冠星，龙伟民，等. bag45cuzn钎料表面刷镀锡的试验研究. 稀有金属材料与工程 (已录用).

15.  王星星，龙伟民，雷卫宁，等. 超临界流体镍基复合电镀层的微观组织和显微硬度. 稀有金属材料与工程 (已录用).

16.  li bao, ting-an zhang,anh v nguyen, et al. fractal kinetic model for digesting alumina. light metals, 2013: 65-70.

17.  li bao, ting-an zhang, weimin long, et al. particle size distribution model for kinetics of digesting alumina.light metals, 2013: 59-64.

18.  fangjie cheng, junxiang yang, haiwei, et al. the relationship between phase structure and melting characteristics of high cesium kf-csf-alf3 aluminum flux. advanced materials research, 2013, 634-638: 2909-2915.

19.  bin sun, pu meng, jinbin lu, et al. influence of brazing time on microstructure of high temperature brazing diamond with ni-cr alloy. advanced materials research, 2012, 628: 452-453.

20.  fangjie cheng, junfeng yao, ying wang, et al. effects of the chemical compositions of kf-csf-alf3 middle temperature aluminum flux on melting characteristics. advanced materials research, 2013, 716: 191-198.

21. 马力，龙伟民，乔培新，等. zn-mg钎料钎焊镁合金az31b的显微组织与力学性能. 焊接学报, 2011, 32(7): 59-60.

22. 丁天然，龙伟民，乔培新，等. 预合金粉对金刚石复合体组织结构影响及机理分析. 焊接学报, 2011, 32(7): 75-78.

23. 张冠星，龙伟民，鲍丽, 等. 硫对银钎料及钎焊性能的影响. 焊接学报, 2013, 34(1): 77-80.

24. 鲍丽，龙伟民，张冠星，等. 微量ca元素对agcuzn钎料性能的影响. 焊接学报, 2012, 33(12): 57-60.

25. 卢金斌，孟普，樊平，等. ni-cr合金保护气氛钎焊金刚石界面cr₇c₃的形核与长大. 焊接学报, 2012, 33(9): 65-68.

26. 刘美娜, 王丽凤, 吕烨, 等. 基于纳米压痕法的无铅bga焊点的循环力学行为. 焊接学报, 2012, 33(9): 69-72.

27. 叶焕，薛松柏，龙伟民，等. 氧化对含稀土无铅钎料表面锡须生长的影响. 焊接学报, 2013, 34(5): 59-61.

28. 程方杰，杨俊香，赵海微，等. 低铯含量kf-csf-alf3铝钎剂的物相结构与熔化特性的关系. 焊接学报, 2013, 34(6): 5-8.

29. 鲍丽，龙伟民，裴夤崟, 等. cuznsnsi合金钎料相变热分析动力学研究. 焊接学报 (已录用).

30. 张冠星，李双喜，潘建军，等. 氧含量对银钎料及钎焊性能的影响. 焊接学报 (已录用).

31. 王星星，龙伟民，马佳，等. sn镀层对agcuzn钎料性能的影响. 焊接学报 (已录用).

32. 薛鹏，薛松柏，沈以赴，等. 温度与镀层对sn-9zn-0.5ga-nd无铅钎料润湿性能的影响. 焊接学报(已录用).

33.  马 力，龙伟民，裴夤崟，等. 钎料元素al zn对镁合金钎焊接头显微组织和抗剪强度的影响. 中国有色金属学报 (已录用).